Datasheet4U Logo Datasheet4U.com

XR34350 - RS-232/485/422 Serial Transceiver

General Description

The XR34350 is an advanced multiprotocol transceiver supporting RS-232, RS-485, and RS-422 serial standards in a 40-pin QFN package.

Key Features

  • Rx enabled during Tx short-circuit condition.
  • Pin selectable cable termination.
  • No external resistors required for RS-485/ RS-422 termination and biasing.
  • 3.3V or 5V single supply operation.
  • Robust ESD protection on bus pins ±15kV IEC 61000-4-2 (air gap) ± 8kV IEC 61000-4-2 (contact) ±15kV (HBM).
  • Max data rate of 20Mbps in RS-485/ RS-422 modes and up to 1Mbps in RS-232 modes.
  • Pin selectable 250kbps slew limiting.
  • 3.

📥 Download Datasheet

Datasheet Details

Part number XR34350
Manufacturer MaxLinear
File Size 511.81 KB
Description RS-232/485/422 Serial Transceiver
Datasheet download datasheet XR34350 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XR34350 RS-232/485/422 Serial Transceiver Exar
XR3400 N-Ch 30V Fast Switching MOSFETs XNRUSEMI
XR3400B N-Ch 30V Fast Switching MOSFETs XNRUSEMI
XR3403 26V Step-up DC/DC Converter XySemi
XR3403 (XR3403 / XR3503) Quad Operational Amplifiers Exar

Other Datasheets by MaxLinear

Part Number Description
XR31233 CAN Bus Transceivers
XR31234 CAN Bus Transceivers
XR31235 CAN Bus Transceivers
XR3160E RS-232/RS-485/RS-422 TRANSCEIVER
XR32220 2-Driver/2-Receiver Intelligent RS-232 Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
XR34350 RS-232/485/422 Serial Transceiver with Internal Termination and Wide Output Swing Description The XR34350 is an advanced multiprotocol transceiver supporting RS-232, RS-485, and RS-422 serial standards in a 40-pin QFN package. Integrated cable termination and four configuration modes allow all three protocols to be used interchangeably over a single cable or connector with no additional switching components. Full operation requires only four external charge pump capacitors. The RS-485/RS-422 modes feature one driver and one receiver (1Tx/1Rx) in both half and full duplex configurations. The RS-232 mode (3Tx/5Rx) provides full support of all eight signals commonly used with the DB9 RS-232 connector. A dedicated diagnostic loopback mode is also provided.