DESCRIPTION
The output voltage of each converter can be adjusted by programming the values in the VOUT setting registers through the I2C interface. The adjustable range is 0.8V to 6V with 50mV resolution. The output voltage also can be set externally using an external resistor divider. The output sequence among the outputs, soft-start time, and the peak inductor current limit are also set through I2C. The switching frequency of the converters can either be set with I2C or can be synchronized to an external clock connected to SYNC pin if needed. The switching regulators are designed to operate from 440kHz to 2.3MHz. Each converter operates in phase or out-of-phase according to the value in the phase setting register. This can minimize the input filter requirements. XR77103 features a supervisor circuit that monitors each converter output. The PGOOD pin is asserted once sequencing is done, all outputs are reported in regulation, and the reset timer expires. The polarity of the signal is active high.
MaxLinear
