MT5815 Datasheet | Maxic Technology

DESCRIPTION The MT5815 is a System on Chip (So C) for magnetic induction based wireless power transmitter solutions. It is fully pliant with the latest Wireless Power Consortium (WPC) Qi v1.2.4 specification, with support of both Baseline Power Profile (BPP) and Extended Power Profile (EPP). The MT5815 provides powerful, flexible, feature rich yet pact wireless power transmitter solutions. It integrates everything except power MOSFET’s and a few passive ponents. These include high voltage Buck, LDO’s, three pairs of N-MOSFET’s drivers (to support two coils applications), multiple channels of unique Analog Front End (AFE) for ASK demodulation, FOD and Q factor detection, powerful and unique DSP for demodulation and FOD, generic 12 bit ADC and DAC, current sensing and Over Voltage, Over Current and Under Voltage Protection (OVP, OCP, UVP), oscillators and PLL with support of external crystal for high accuracy clock and extremely low power deep sleep mode, plenty of channels of PWM for individual control of each power MOSFET’s for flexible dead time control and phase shift generation, power adaptor interface detection and control with support of QC 2.0/3.0, USB PD, SCP, FCP and AFC, etc. As the control and configuration center as well as data processor, MT5815 integrates an ARM Cortex M0 processor with a spacious 64KByte e Flash memory and 4KByte SRAM, as well as various serial interfaces (I2C, UART, GPIO’s, etc.), offering powerful processing capabilities and customized features . With a single MT5815, one can implement any single coil or dual coil transmitters defined in WPC specification; by adding one tiny panion driver chip (MT5812), one can implement a 4 coil transmitter or two independent transmitters. 2 FEATURES - Wide input voltage, ranging from 3.5V to 20V, and up to 40W of power transfer - pliant with latest WPC Qi specification v1.2.4 and beyond, supporting proprietary protocols. - Embedded 32-bit ARM M0 processor with 64KB e Flash and 4 KB SRAM - Supports...