Datasheet4U Logo Datasheet4U.com

DS1854 - Dual Temperature-Controlled Resistors

General Description

The DS1854 dual temperature-controlled nonvolatile (NV) variable resistors with two monitors consists of two 50kΩ 256-position linear variable resistors, two analog monitor inputs (MON1, MON2), and a direct-to-digital temperature sensor.

Key Features

  • Four Total Monitored Channels (Temperature, VCC, MON1, MON2).
  • Two External Analog Inputs (MON1, MON2).
  • Internal Direct-to-Digital Temperature Sensor.
  • Two 50kΩ, Linear, 256-Position, Nonvolatile Temperature-Controlled Variable Resistors.
  • Resistor Settings Changeable Every 2°C.
  • Access to Monitoring and ID Information Configurable with Separate Device Addresses.
  • Resistor Disable (Open-Circuit) Function.
  • 2-Wire Serial Interface.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS1851 Dual Temperature-Controlled NV Digital-to-Analog Converters Dallas Semiconducotr
DS1852 Optical Transceiver Diagnostic Monitor Dallas Semiconductor
DS1855 Dual Nonvolatile Digital Potentiometer and Secure Memory Maxim Integrated
DS1800 Dual Inverting Log Gain/Attenuator Dallas Semiconducotr
DS1800-3 AC-DC / Distributed Power Front-End 1U Emerson

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
DS1856 Temperature-Controlled Resistors
DS1857 Dual Temperature-Controlled Resistors with External Temperature Input and Monitors
DS1858 Dual Temperature-Controlled Resistors
DS1859 Temperature-Controlled Resistors
DS1825 Programmable Resolution 1-Wire Digital Thermometer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Rev 0; 1/03 Dual Temperature-Controlled Resistors with Two Monitors General Description The DS1854 dual temperature-controlled nonvolatile (NV) variable resistors with two monitors consists of two 50kΩ 256-position linear variable resistors, two analog monitor inputs (MON1, MON2), and a direct-to-digital temperature sensor. The device provides an ideal method for setting and temperature-compensating bias voltages and currents in control applications using minimal circuitry. The variable resistor settings are stored in www.DataSheet4U.com EEPROM memory and can be accessed over the 2-wire serial bus.