Datasheet4U Logo Datasheet4U.com

DS2741 - Current Monitor and Accumulator

General Description

The DS2741 current monitor/accumulator is a complete current-sensing, measuring, and accumulation device tailored for cost-sensitive, battery-powered applications in a small 3mm x 3mm TDFN package.

Key Features

  • Complete, Low-Cost, Integrated Current-Sensing and Accumulation Solution with Serial Digital Output.
  • On-Board 38mΩ Sense Resistor.
  • Current Measurement: Signed 10-Bit Bidirectional Measurement ±2.5A Dynamic Range 1% Error at +25°C 2% Error Over Temperature.
  • Current Accumulation: 0.247mAhr LSB ±8.1Ahrs Full-Scale Range.
  • Industry-Standard I2C Interface with FactoryProgrammable Slave Address.
  • 2.5V to 4.5V Single-Supply Operation.
  • Low-Po.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS2740 High-Precision Coulomb Counter Maxim Integrated
DS2746 Low-Cost 2-Wire Battery Monitor Manix
DS2703 SHA-1 Battery Pack Authentication IC Dallas Semiconductor
DS2710 Single-Cell NiMH Charger Maxim
DS2715 NiMH Battery Pack Charge Controller Dallas Semiconducotr

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
DS2745 Low-Cost I2C Battery Monitor
DS2704 1280-Bit EEPROM
DS2705 SHA-1 Authentication Master
DS2711 (DS2711 / DS2712) Loose Cell NiMH Chargers
DS2712 (DS2711 / DS2712) Loose Cell NiMH Chargers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-4683; Rev 1; 7/09 www.DataSheet4U.com Current Monitor and Accumulator with Integrated Sense Resistor General Description The DS2741 current monitor/accumulator is a complete current-sensing, measuring, and accumulation device tailored for cost-sensitive, battery-powered applications in a small 3mm x 3mm TDFN package. As a result, the DS2741 is a key component in battery-charge control and remaining capacity-estimation applications. Through its I2C interface, the DS2741 gives the host system access to current measurement and accumulation registers. The 7-bit slave address is factory programmable, allowing up to 128 devices to be individually addressed by the host system.