Datasheet4U Logo Datasheet4U.com

DS2780 - Standalone Fuel Gauge

General Description

The DS2780 measures voltage, temperature and current, and estimates available capacity for rechargeable Lithium Ion and Lithium Ion Polymer batteries.

Cell characteristics and application parameters used in the calculations are stored in onchip EEPROM.

Key Features

  • Precision Voltage, Temperature, and Current Measurement System Accurate, Temperature Stable Internal Time Base Absolute and Relative Capacity Estimated from Coulomb Count, Discharge Rate, Temperature and Battery Cell Characteristics Accurate Warning of Low Battery Conditions Automatic Backup of Coulomb Count and Age Estimation to Nonvolatile (NV) EEPROM Gain and Tempco Calibration Allows the Use of Low-Cost Sense Resistors 24-Byte Battery/.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS27820 Remote Control Color TV Service Manual Sanyo
DS2788 Stand-Alone Fuel-Gauge Maxim Integrated
DS2703 SHA-1 Battery Pack Authentication IC Dallas Semiconductor
DS2710 Single-Cell NiMH Charger Maxim
DS2715 NiMH Battery Pack Charge Controller Dallas Semiconducotr

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
DS2781 1-Cell or 2-Cell Standalone Fuel Gauge
DS2782 Stand-Alone Fuel Gauge
DS2784 1-Cell Stand-Alone Fuel Gauge
DS2786 Standalone OCV-Based Fuel Gauge
DS2786B Stand-Alone OCV-Based Fuel Gauge

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com DS2780 Stand-Alone Fuel Gauge IC www.maxim-ic.com GENERAL DESCRIPTION The DS2780 measures voltage, temperature and current, and estimates available capacity for rechargeable Lithium Ion and Lithium Ion Polymer batteries. Cell characteristics and application parameters used in the calculations are stored in onchip EEPROM. The available capacity registers report a conservative estimate of the amount of charge that can be removed given the current temperature, discharge rate, stored charge and application parameters. Capacity estimation reported in mAh remaining and percentage of full.