Datasheet4U Logo Datasheet4U.com

DS3901 - 8-Bit NV Variable Resistor

General Description

The DS3901 is a triple, 8-bit nonvolatile (NV) variable resistor.

Each of the resistors has two setting registers, which are selectable by software or by pin configuration.

The selected register determines the value of the variable resistor.

Key Features

  • an optional password-protection scheme that allows the protection of sensitive data. Features o Three 256-Position Linear Digital Resistors o Full-Scale Resistances 50kΩ, 30kΩ, 20kΩ o Dual NV Settings for Each Resistor o o o o Low Temperature-Coefficient Resistors I2C.
  • Serial Interface Wide Operating Voltage (2.4V to 5.5V) Two-Level Password Write Protection DS3901 o 232 Bytes of User EEPROM o Programmable Slave Address o -40°C to +95°C Operating Temperature Range.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS3900 Serial Communications Module Dallas Semiconducotr
DS3900P2 USB HID Communications Module Maxim Integrated
DS3904 Triple 128-Position Nonvolatile Digital Variable Resistor/Switch Dallas Semiconducotr
DS3905 Triple 128-Position Nonvolatile Digital Variable Resistor/Switch Dallas Semiconducotr
DS3923 High-Speed Current Mirror Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
DS3903 Triple 128-Position Nonvolatile Digital Potentiometer
DS3920 Fast Current Mirror
DS3930 Hex Nonvolatile Potentiometer
DS3988 8-Channel Cold-Cathode Fluorescent Lamp Controller
DS3992 2-Channel Push Pull CCFL Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Rev 0; 4/06 Triple, 8-Bit NV Variable Resistor with Dual Settings and User EEPROM General Description The DS3901 is a triple, 8-bit nonvolatile (NV) variable resistor. Each of the resistors has two setting registers, which are selectable by software or by pin configuration. The selected register determines the value of the variable resistor. Additionally, all three resistors have a high-impedance setting. Resistor R0 has the additional flexibility of allowing an external shunt resistor to provide increased dynamic range. Internal address settings allow the DS3901 slave address to be programmed to one of 128 possible addresses. The DS3901 also features an optional password-protection scheme that allows the protection of sensitive data.