Datasheet4U Logo Datasheet4U.com

DS8005 - Smart Card Interface

General Description

The DS8005 dual smart card interface is a low-cost, dual analog front-end for an IC card reader interface that needs to communicate with two smart cards in a mutually exclusive fashion.

The analog interface is designed for use in ISO 7816, EMV®, and B-CAS applications.

Key Features

  • Analog Interface and Level Shifting for IC Card Communication.
  • ±8kV (min) ESD (HBM) Protection on Card Interfaces.
  • Ultra-Low Stop-Mode Current, Less than 10nA Typical.
  • Internal IC Card Supply-Voltage Generation 5.0V ±5%, 80mA (max) 3.0V ±8%, 65mA (max) 1.8V ±10%, 30mA (max).
  • Automatic Card Activation and Deactivation Controlled by Dedicated Internal Sequencer.
  • I/O Lines from Host Directly Level Shifted for Smart Card Communication.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS80C310 High-Speed Microcontroller Maxim Integrated
DS80C320 High-Speed/Low-Power Microcontrollers Maxim Integrated
DS80C323 High-Speed/Low-Power Microcontrollers Maxim Integrated
DS80C390 Dual CAN High-Speed Microprocessor Maxim Integrated
DS80C400 Network Microcontroller Dallas Semiconducotr

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
DS8007 multiprotocol dual smart card interface
DS8007A Multiprotocol Dual Smart Card Interface
DS8023 Smart Card Interface
DS8024 Smart Card Interface
DS80C400 Network Microcontroller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-5257; Rev 0; 4/10 www.DataSheet4U.com Smart Card Interface General Description The DS8005 dual smart card interface is a low-cost, dual analog front-end for an IC card reader interface that needs to communicate with two smart cards in a mutually exclusive fashion. The analog interface is designed for use in ISO 7816, EMV®, and B-CAS applications. The device is functionally similar to two DS8024s with external multiplexing to select the active interface, but also includes low power and 1.8V card support. Additionally, the device is designed for applications where the C4/C8 (AUX1/AUX2) contacts are not required on either card interface. The device is provided in a 28-pin SO package.