Datasheet4U Logo Datasheet4U.com

DS8313 - Smart Card Interface

General Description

The DS8313 smart card and SIM interface IC is a lowcost, analog front-end for a smart card reader designed for smart card applications that do not require the use of the auxiliary card I/O contacts C4 and C8 (AUX1 and AUX2).

The DS8313 supports 5V, 3V, and 1.8V smart cards.

Key Features

  • Analog Interface and Level Shifting for IC Card Communication.
  • ±8kV (min) ESD (HBM) Protection on Card Interfaces.
  • Ultra-Low Stop-Mode Current, Less Than 10nA Typical.
  • Internal IC Card Supply-Voltage Generation 5.0V ±5%, 80mA (max) 3.0V ±8%, 65mA (max) 1.8V ±10%, 30mA (max).
  • Automatic Card Activation and Deactivation Controlled by Dedicated Internal Sequencer.
  • I/O Lines from Host Directly Level Shifted for Smart Card Communication.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS8301A 400mA Low Dropout Voltage Linear Regulator DSTECH
DS8304 200mA Low Dropout Voltage Linear Regulator DSTECH
DS8304A 400mA Low Dropout Voltage Linear Regulator DSTECH
DS8307A 400mA Low Dropout Voltage Linear Regulator DSTECH
DS8364 200mA Low Dropout Voltage Linear Regulator DSTECH

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
DS8313 (DS8313 / DS8314) Smart Card Interface
DS8314 Smart Card Interface
DS8314 (DS8313 / DS8314) Smart Card Interface
DS8005 Smart Card Interface
DS8007 multiprotocol dual smart card interface

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-4655; Rev 1; 5/09 www.DataSheet4U.com Smart Card Interface General Description The DS8313 smart card and SIM interface IC is a lowcost, analog front-end for a smart card reader designed for smart card applications that do not require the use of the auxiliary card I/O contacts C4 and C8 (AUX1 and AUX2). The DS8313 supports 5V, 3V, and 1.8V smart cards. The absence of a charge pump reduces active power consumption, and the DS8313 also supports an ultra-low-power 10nA stop mode. The DS8313 is designed to interface between a system microcontroller and the smart card interface, providing all power supply, protection, and level shifting required for IC card applications. The DS8314 is similar to the DS8313, but only uses one analog (smart card) power supply.