Datasheet4U Logo Datasheet4U.com

MAX11015 - Automatic RF MESFET Amplifier Drain-Current Controllers

Download the MAX11015 datasheet PDF. This datasheet also covers the MAX11014 variant, as both devices belong to the same automatic rf mesfet amplifier drain-current controllers family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX11014/MAX11015 set and control bias conditions for dual MESFET power devices found in point-topoint communication and other microwave base stations.

Key Features

  • Dual Drain-Current-Sense Gain Amplifier Preset Gain of 4 ±0.5% Accuracy for Sense Voltages Between 75mV and 625mV (MAX11014).
  • Common-Mode Sense-Resistor Voltage Range 0.5V to 11V (MAX11014) 5V to 32V (MAX11015).
  • Low-Noise Output GATE Bias with ±10mA GATE Drive.
  • Fast Clamp and Power-On Reset.
  • 12-Bit DAC Controls MESFET GATE Voltage.
  • Internal Temperature Sensor/Dual Remote Diode Temperature Sensors.
  • Internal 12-Bit ADC Measures Temper.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX11014_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1101 Single-Chip / 8-Bit CCD Digitizer Maxim
MAX110 Low-Cost / 2-Channel / 14-Bit Serial ADCs Maxim
MAX1102 8-Bit CODECs Maxim
MAX1103 8-Bit CODECs Maxim Integrated
MAX1104 8-Bit CODECs Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX11014 Automatic RF MESFET Amplifier Drain-Current Controllers
MAX11040 Sigma-Delta ADC
MAX11040K (MAX11040K / MAX11060) Sigma-Delta ADCs
MAX11041 (MAX11041 / MAX11042) Wired Remote Controllers
MAX11042 (MAX11041 / MAX11042) Wired Remote Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com XX-XXXX; Rev 0; 10/05 Automatic RF MESFET Amplifier Drain-Current Controllers General Description The MAX11014/MAX11015 set and control bias conditions for dual MESFET power devices found in point-topoint communication and other microwave base stations. The MAX11014 integrates complete dual analog closed-loop drain-current controllers for Class A MESFET amplifier operation while the MAX11015 targets Class AB operation. Both devices integrate SRAM lookup tables (LUTs) that can be used to store temperature and drain-current compensation data. Each device includes dual high-side current-sense amplifiers to monitor the MESFET drain currents through the voltage drop across the sense resistors in the range of 0mV to 625mV.