MAX13036 Datasheet | Maxim Integrated

Description Features o +6V to +26V Operating Voltage Range o +42V patibility on BAT o Inputs Withstand Reverse Battery o Withstands Dynamic Battery Voltage Drop While VL is Present o Ultra-Low Operating Current 17µA (typ) in Scan Mode o Resistor-Adjustable Switching Hysteresis o CMOS-patible Logic Outputs (+2.7V min) o Built-In Switch Debouncing o Interrupt Output o Immunity to Transients o High Modularity o Thermal Protection o ±8k V HBM ESD Protection on IN0- IN7 Without External ponents o Two Inputs (IN0, IN1) Programmable as Direct Outputs o Four Inputs (IN4- IN7) Programmable for BAT or GND Related Switches The MAX13036 automotive contact monitor and level shifter monitors and debounces eight remote mechanical switches and asserts an interrupt ( INT ) if a switch changes state. The state of each switch is sampled through an SPI™ interface by reading the status register and any switch can be prohibited from asserting an interrupt by writing to the mand register. Four of the switch inputs are intended for ground-connected switches (IN0- IN3), and the other four inputs (IN4- IN7), are programmable in groups of two for either ground-connected or battery-connected switches. Two switch inputs (IN0, IN1) have direct level-shifted outputs (DO0, DO1) to be used for PWM or other timing-based signals. Switch input thresholds are set to 50% of the voltage applied to BATREF. The threshold hysteresis is set by connecting an external resistor from HYST to ground. The MAX13036 supplies an adjustable wetting current to each closed switch to clean mechanical switch contacts that are exposed to adverse conditions. The MAX13036 operates with a +6V to +26V battery voltage applied to BAT. A separate +2.7V to +5.5V logic supply input (VL) sets the interface voltage. The MAX13036 is .. available in a 5mm x 5mm 28-pin TQFN package and operates over the -40°C to +125°C temperature range. Applications Body puters Window Lifters Seat Movers Electric Sunroofs Other Control...