Datasheet4U Logo Datasheet4U.com

MAX13038 - (MAX13037 / MAX13038) Automotive Contact Monitor and Level Shifters

Download the MAX13038 datasheet PDF. This datasheet also covers the MAX13037 variant, as both devices belong to the same (max13037 / max13038) automotive contact monitor and level shifters family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX13037/MAX13038 automotive contact monitor and level shifters monitor and debounce eight remote mechanical switches and assert an interrupt (INT) if a switch changes state.

The state of each switch is sampled through an SPI™ interface by reading the status register.

Key Features

  • o +6V to +26V Operating Voltage Range MAX13037/MAX13038.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX13037_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX130 3 Digit A/D Converters with Bandgap Refrence Maxim
MAX13000E Ultra-Low-Voltage Level Translators Maxim Integrated
MAX13001E Ultra-Low-Voltage Level Translators Maxim Integrated
MAX13002E Ultra-Low-Voltage Level Translators Maxim Integrated
MAX13003E Ultra-Low-Voltage Level Translators Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX1303 Serial 16-Bit ADCs
MAX13030E 6-Channel High SPeed LLT
MAX13031E 6-Channel High SPeed LLT
MAX13032E 6-Channel High SPeed LLT
MAX13033E 6-Channel High SPeed LLT

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 19-1084; Rev 0; 11/07 Automotive Contact Monitor and Level Shifters with LDO Regulator General Description The MAX13037/MAX13038 automotive contact monitor and level shifters monitor and debounce eight remote mechanical switches and assert an interrupt (INT) if a switch changes state. The state of each switch is sampled through an SPI™ interface by reading the status register. Any switch can be prohibited from asserting an interrupt by writing to the command register. Four of the switch inputs are intended for ground-connected switches (IN0–IN3) and the other four inputs (IN4–IN7) are programmable in groups of two for either groundconnected or battery-connected switches.