MAX1429
Overview
- 100Msps Minimum Sampling Rate
- -77.7dBFS Noise Floor
- Excellent Dynamic Performance 75.1dB SNR at fIN = 15MHz and AIN = -1dBFS 90dBc/94dBc Single-Tone SFDR1/SFDR2 at fIN = 15MHz and AIN = -1dBFS -100dBc Multitone SFDR at fIN1 = 10MHz and fIN2 = 15MHz
- Less than 0.25ps Sampling Jitter
- Fully Differential Analog Input Voltage Range of 2.2VP-P
- CMOS-Compatible Two’s-Complement Data Output
- Separate Data Valid Clock and Overrange Outputs
- Flexible-Input Clock Buffer
- EV Kit Available for MAX1429 (Order MAX1427EVKIT) MAX1429 The MAX1429 is a 5V, high-speed, high-performance analog-to-digital converter (ADC) featuring a fully differential wideband track-and-hold (T/H) and a 15-bit converter core. The MAX1429 is optimized for multichannel, multimode receivers, which require the ADC to meet very stringent dynamic performance requirements. With a noise floor of -77.7dBFS, the MAX1429 allows for the design of receivers with superior sensitivity. The MAX1429 achieves two-tone, spurious-free dynamic range (SFDR) of -100dBc for input tones of 10MHz and 15MHz. Its excellent signal-to-noise ratio (SNR) of 75.1dB and single-tone SFDR performance (SFDR1/SFDR2) of 90dBc/94dBc at fIN = 15MHz and a sampling rate of 80Msps make this part ideal for high-performance digital receivers. The MAX1429 operates from an analog 5V and a digital 3V supply, features a 2.2V P-P full-scale input range, and allows for a sampling speed of up to 100Msps. The input T/H operates with a -1dB full-power bandwidth of 260MHz. The MAX1429 features parallel, CMOS-compatible outputs in two’s-complement format. To enable the interface with a wide range of logic devices, this ADC provides a separate output driver power-supply range of 2.3V to 3.5V. The MAX1429 is manufactured in an 8mm x 8mm, 56-pin thin QFN
