Datasheet4U Logo Datasheet4U.com

MAX14521E - High-Voltage EL Lamp Driver

General Description

The MAX14521E is a quad-output high-voltage DC-AC converter that drives four electroluminescent (EL) lamps.

Key Features

  • a 2.7V to 5.5V input range that allows the device to accept a variety of voltage sources such as single-cell lithium-ion (Li+) batteries. The lamp outputs of the device generate up to 300VP-P for maximum lamp brightness. The high-voltage outputs are ESD protected up to ±15kV Human Body Model (HBM), ±6kV Contact Discharge, and ±8kV Air Gap Discharge, as specified in IEC 61000-4-2. The MAX14521E uses a high-voltage full-bridge output stage to convert the high voltage generated by the boost convert.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1452 Low-Cost Precision Sensor Signal Conditioner Maxim
MAX145 Serial 12-Bit ADCs Maxim
MAX1450 1%-Accurate Signal Conditioner Maxim
MAX14502 Hi-Speed USB-to-SD Card Readers Maxim Integrated
MAX14504 Dual SPDT Negative Rail Analog Switches Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX14523A Adjustable Current-Limit Switches
MAX14523AL Adjustable Current-Limit Switches
MAX14523B Adjustable Current-Limit Switches
MAX14523C Adjustable Current-Limit Switches
MAX14525 Battery Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Click here for production status of specific part numbers. MAX14521E EVALUATION KIT AVAILABLE Quad, High-Voltage EL Lamp Driver with I2C Interface General Description The MAX14521E is a quad-output high-voltage DC-AC converter that drives four electroluminescent (EL) lamps. The device features a 2.7V to 5.5V input range that allows the device to accept a variety of voltage sources such as single-cell lithium-ion (Li+) batteries. The lamp outputs of the device generate up to 300VP-P for maximum lamp brightness. The high-voltage outputs are ESD protected up to ±15kV Human Body Model (HBM), ±6kV Contact Discharge, and ±8kV Air Gap Discharge, as specified in IEC 61000-4-2.