Datasheet4U Logo Datasheet4U.com

MAX17530 - Synchronous Step-Down DC-DC Converter

General Description

The MAX17530 high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operates over a 4V to 42V input.

The converter can deliver up to 25mA and generates output voltages from 0.8V up to 0.9 x VIN.

Key Features

  • Reduces External Components and Total Cost.
  • No Schottky.
  • Synchronous.
  • Internal Compensation for Any Output Voltage.
  • Built-In Soft-Start.
  • All-Ceramic Capacitors, Compact Layout.
  • Reduces Number of DC-DC Regulators to Stock.
  • Wide 4V to 42V Input.
  • Adjustable 0.8V to 0.9 x VIN Output.
  • 100kHz to 2.2MHz Adjustable Switching Frequency with External Synchronization.
  • Reduces Power Dissipation.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX17531 50mA Synchronous Step-Down DC-DC Converter Maxim Integrated
MAX17536 Step-Down DC-DC Converter Maxim Integrated
MAX17501 Synchronous Step-Down DC-DC Converter Maxim
MAX17502 Synchronous Step-Down DC-DC Converter Maxim
MAX17503 Synchronous Step-Down DC-DC Converter Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX17535 High-Frequency Low-Cost SMBus Chargers
MAX17500 Current-Mode PWM Controllers
MAX17528 1-Phase Quick-PWM Intel IMVP-6.5/GMCH Controllers
MAX17582 Dual-Phase Quick-PWM Controller
MAX17595 (MAX17595 - MAX17597) Peak-Current-Mode Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX17530 42V, 25mA, Ultra-Small, High-Efficiency, Synchronous Step-Down DC-DC Converter with 22µA No-Load Supply Current General Description The MAX17530 high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operates over a 4V to 42V input. The converter can deliver up to 25mA and generates output voltages from 0.8V up to 0.9 x VIN. The feedback (FB) voltage is accurate to within ±1.75% over -40°C to +125°C. The MAX17530 uses peak-current-mode control. The device can be operated in pulse-width modulation (PWM) or pulse-frequency modulation (PFM) modes. The device is available in a 10-pin (3mm x 2mm) TDFN and 10-pin (3mm x 3mm) μMAX® packages. Simulation models are available.