Datasheet4U Logo Datasheet4U.com

MAX19192 - Dual 8-Bit ADC

General Description

The MAX19192 is an ultra-low-power, dual, 8-bit, 10Msps analog-to-digital converter (ADC).

Key Features

  • two fully differential wideband track-and-hold (T/H) inputs. These inputs have a 440MHz bandwidth and accept fully differential or single-ended signals. The MAX19192 delivers a typical signal-to-noise and distortion (SINAD) of 48.6dB at an input frequency of 1.875MHz and a sampling rate of 10Msps while consuming only 15.3mW. This ADC operates from a 2.7V to 3.6V analog power supply. A separate 1.8V to 3.6V supply powers the digital output driver. In addition to ultra-low operating power, the MAX.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX191 12-Bit Sampling ADC Maxim
MAX1910 1.5x/2x High-Efficiency White LED Charge Pumps Maxim
MAX1912 1.5x/2x High-Efficiency White LED Charge Pumps Maxim
MAX1916 Low-Dropout / Constant-Current Triple White LED Bias Supply Maxim
MAX1917 Tracking / Sinking and Sourcing / Synchronous Buck Controller for DDR Memory and Termination Supplies Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX19191 8-Bit ADC
MAX1907A Quick-PWM Master Controllers
MAX1908 Low-Cost Multichemistry Battery Chargers
MAX1909 Multichemistry Battery Charger
MAX1922 1A Current-Limited Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-5098; Rev 0; 1/10 www.DataSheet4U.com Ultra-Low-Power, 10Msps, Dual 8-Bit ADC General Description The MAX19192 is an ultra-low-power, dual, 8-bit, 10Msps analog-to-digital converter (ADC). The device features two fully differential wideband track-and-hold (T/H) inputs. These inputs have a 440MHz bandwidth and accept fully differential or single-ended signals. The MAX19192 delivers a typical signal-to-noise and distortion (SINAD) of 48.6dB at an input frequency of 1.875MHz and a sampling rate of 10Msps while consuming only 15.3mW. This ADC operates from a 2.7V to 3.6V analog power supply. A separate 1.8V to 3.6V supply powers the digital output driver. In addition to ultra-low operating power, the MAX19192 features three powerdown modes to conserve power during idle periods.