Datasheet4U Logo Datasheet4U.com

MAX2335 - 450MHz CDMA/OFDM LNA/Mixer

General Description

The MAX2335 RF front-end receiver IC is designed for CDMA and OFDM applications in the 450MHz band.

The MAX2335 includes a low-noise amplifier (LNA) with adjustable IIP3 to minimize desensitization due to crossmodulation in the presence of a large interfering signal.

Key Features

  • differential IF outputs and is designed for high linearity and low noise, which is well suited for CDMA and OFDM.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX233 Multichannel RS-232 Drivers/Receivers Maxim Integrated
MAX230 Multichannel RS-232 Drivers/Receivers Maxim
MAX2306 CDMA IF VGAs and I/Q Demodulators Maxim Integrated
MAX2308 CDMA IF VGAs and I/Q Demodulators Maxim Integrated
MAX2309 CDMA IF VGAs and I/Q Demodulators Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX2338 Triple/Dual-Mode CDMA LNA/Mixers
MAX233A +5V-Powered / Multichannel RS-232 Drivers/Receivers
MAX232E 5V RS-232 Transceivers
MAX2351 Quadruple-Mode PCS/Cellular/GPS LAN/Mixers
MAX2354 Quadruple-Mode PCS/Cellular/GPS LAN/Mixers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX2335 19-0492; Rev 0; 10/05 EVAALVUAAILTAIOBNLEKIT 450MHz CDMA/OFDM LNA/Mixer General Description The MAX2335 RF front-end receiver IC is designed for CDMA and OFDM applications in the 450MHz band. The MAX2335 includes a low-noise amplifier (LNA) with adjustable IIP3 to minimize desensitization due to crossmodulation in the presence of a large interfering signal. The mixer features differential IF outputs and is designed for high linearity and low noise, which is well suited for CDMA and OFDM applications. An on-chip frequency divider is included to allow the use of a standard 1GHz VCO. Alternatively, the divider can be bypassed for use with a lower-frequency VCO.