MAX3353E Datasheet | Maxim Integrated

Description The MAX3353E I 2 C™-patible USB On-The-Go (OTG) regulated charge pump with switchable pullup/pulldown resistors allows peripherals and mobile devices such as PDAs, cellular phones, and digital cameras to be interconnected without a host PC. The MAX3353E enables a system with an integrated USB dual-role transceiver to function as a USB OTG dual-role device. The charge pump in the MAX3353E supplies VBUS power and signaling that is required by the transceiver as defined in On-The-Go Supplement: USB 2.0, Revision 1.0. The MAX3353E provides the switchable pullup and pulldown resistors on D+ and Drequired for a dual-role device. The MAX3353E integrates a regulated charge pump, switchable pullup/pulldown resistors, and an I2C-patible 2-wire serial interface. The device provides a detector to monitor ID status and operates with logic supply voltages (VL) between +1.65V and VCC and charge-pump supply voltages (V CC ) from +2.6V to +5.5V. The charge pump supplies an OTG-patible output on VBUS while sourcing 8m A output current. The MAX3353E enables USB OTG munication between digital logic parts that cannot supply or tolerate the +5V VBUS levels that USB OTG requires. By controlling and measuring VBUS using internal parators, this device supports USB OTG session request protocol (SRP) and host negotiation protocol (HNP). The MAX3353E has built-in ±15k V ESD protection circuitry to guard VBUS, ID_IN, D+, and D-. The MAX3353E is available in a 5 x 4 chip-scale package (UCSP™) and 16-pin TSSOP package. Features o Ideal for Enabling USB Dual-Role ponents for USB OTG Protocol o Charge Pump for VBUS Signaling and Operation Down to +2.6V o Level Translators Allow Low-Voltage System Interface o Internal VBUS parators and ID Detector o Internal Switchable Pullup and Pulldown Resistors for Host/Peripheral Functionality o I2C-patible Bus Interface with mand and Status Registers o Interrupt Features o ±15k V ESD Protection on ID_IN, VBUS, D+, and Do Supports SRP and HNP o...