Datasheet4U Logo Datasheet4U.com

MAX4947 - Hex SPDT Data Switch

General Description

The MAX4947/MAX4948 analog switches operate from a single +1.8V to +5.5V supply.

These switches feature a low 30pF (typ) capacitance for high-speed data switching applications.

Key Features

  • Multiplex SDIO or Memory Stick Interfaces 1.8V to 5.5V Supply Voltage Range Low On-Resistance 4Ω (typ) Low-Capacitance Switches, 30pF (typ) Rail-to-Rail Signal Handling Small 25-Bump UCSP™ (2.5mm x 2.5mm) and 24-TQFN (4mm x 4mm) MAX4947/MAX4948 Ordering Information PART MAX4947EBA+.
  • MAX4947ETG+ MAX4948EBA+.
  • MAX4948ETG+.
  • TEMP RANGE -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX494 Single/Dual/Quad / Micropower / Single-Supply Rail-to-Rail Op Amps Maxim
MAX490 Low-Power / Slew-Rate-Limited RS-485/RS-422 Transceivers Maxim
MAX4906 FHigh-/Full-Speed USB 2.0 Switches Maxim Integrated
MAX4908 Dual 3:1 Clickless Audio Multiplexers Maxim Integrated
MAX4909 Dual 3:1 Clickless Audio Multiplexers Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX4948 Hex SPDT Data Switch
MAX4901 Low-RON & Dual-SPST/Single-SPDT Clickless Switches
MAX4902 Low-RON & Dual-SPST/Single-SPDT Clickless Switches
MAX4903 Low-RON & Dual-SPST/Single-SPDT Clickless Switches
MAX4904 Low-RON & Dual-SPST/Single-SPDT Clickless Switches

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 19-0673; Rev 0; 11/06 Hex SPDT Data Switch General Description The MAX4947/MAX4948 analog switches operate from a single +1.8V to +5.5V supply. These switches feature a low 30pF (typ) capacitance for high-speed data switching applications. The MAX4947 is a triple double-pole/double-throw (DPDT) switch, and the MAX4748 is a hex single-pole/doublethrow (SPDT) switch with one control logic input. The MAX4947 has three logic inputs to control the switches in pairs. The MAX4948 has one logic input and an enable input (EN) to disable the switches. The MAX4947/MAX4948 are available in small 24-pin (4mm x 4mm) TQFN and 25-bump (2.5mm x 2.5mm) chip-scale packages (UCSP™). ♦ ♦ ♦ ♦ ♦ ♦ Features Multiplex SDIO or Memory Stick Interfaces 1.8V to 5.