Datasheet4U Logo Datasheet4U.com

MAX5070 - (MAX5070 / MAX5071) Current-Mode PWM Controllers

General Description

The MAX5070/MAX5071 BiCMOS, high-performance, current-mode PWM controllers have all the

Key Features

  • required for wide input voltage range isolated/nonisolated power supplies. These controllers are used for low- and high-power universal input voltage and telecom power supplies. The MAX5070/MAX5071 contain a fast comparator with only 60ns typical delay from current sense to the output for overcurrent protection. The MAX5070A/MAX5070B have an integrated error amplifier with the output at COMP. Soft-start is achieved by controlling the COMP voltage rise using external components. The frequency is.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX507 Voltage-Output / 12-Bit DACs with Internal Reference Maxim
MAX500 CMOS / Quad / Serial-Interface 8-Bit DAC Maxim
MAX5003 High-Voltage PWM Power-Supply Controller Maxim
MAX501 Voltage-Output / 12-Bit Multiplying DACs Maxim
MAX5012 12-Bit / 100Msps ECL DAC Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX5071 (MAX5070 / MAX5071) Current-Mode PWM Controllers
MAX5072 Dual-Output Buck or Boost Converter
MAX5073 Dual-Output Buck or Boost Converter
MAX5074 Power IC with Integrated MOSFETs
MAX5075 Push-Pull FET Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3283; Rev 3; 10/06 www.DataSheet4U.com High-Performance, Single-Ended, Current-Mode PWM Controllers General Description The MAX5070/MAX5071 BiCMOS, high-performance, current-mode PWM controllers have all the features required for wide input voltage range isolated/nonisolated power supplies. These controllers are used for low- and high-power universal input voltage and telecom power supplies. The MAX5070/MAX5071 contain a fast comparator with only 60ns typical delay from current sense to the output for overcurrent protection. The MAX5070A/MAX5070B have an integrated error amplifier with the output at COMP. Soft-start is achieved by controlling the COMP voltage rise using external components. The frequency is adjustable from 20kHz to 1MHz with an external resistor and capacitor.