Datasheet4U Logo Datasheet4U.com

MAX5168 - 32-Channel Sample/Hold Amplifier

General Description

The MAX5168 contains 32 sample/hold amplifiers and four 1-of-8 multiplexers.

The logic controlling the muxes and sample/hold amplifiers combines the four muxes into a unified 1-of-32 multiplexer with a sample/hold at each output.

Key Features

  • MAX5168 Ordering Information PART MAX5168LCCM MAX5168MCCM MAX5168NCCM MAX5168LECM MAX5168MECM MAX5168NECM TEMP. RANGE 0°C to +70°C 0°C to +70°C 0°C to +70°C -40°C to +85°C -40°C to +85°C -40°C to +85°C.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX516 Quad Comparator Maxim
MAX5160 Low-Power Digital Potentiometers Maxim
MAX5161 Low-Power Digital Potentiometers Maxim
MAX510 Quad / Serial 8-Bit DACs Maxim
MAX5100 +2.7V to +5.5V / Low-Power / Quad / Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX5165 32-Channel Sample/Hold Amplifier
MAX5166 32-Channel Sample/Hold Amplifier
MAX5109 8-Bit DACs
MAX5128 Linear-Taper Digital Potentiometer
MAX5131 Voltage-output DACs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1674; Rev 0; 4/00 32-Channel Sample/Hold Amplifier with a Single Multiplexed Input General Description The MAX5168 contains 32 sample/hold amplifiers and four 1-of-8 multiplexers. The logic controlling the muxes and sample/hold amplifiers combines the four muxes into a unified 1-of-32 multiplexer with a sample/hold at each output. Additional logic allows two devices to function as a single 64-channel unit. The MAX5168 is available with an output impedance of 50Ω, 500Ω, or 1kΩ. The MAX5168 operates with +10V and -5V supplies, and a separate +5V digital logic supply. Manufactured with a proprietary BiCMOS process, it provides high accuracy, fast acquisition time, a low droop rate, and a low hold step. The MAX5168 has a typical linearity error of less than 0.