MAX5547 Datasheet | Maxim Integrated

.. 19-3988; Rev 0; 2/06 Dual, 10-Bit, Current-Sink Output DAC General Description The MAX5547 dual, 10-bit, dual range, digital-to-analog converter (DAC) sinks up to 3.6m A of current, making it ideal for laser-driver-control applications. Parallel the MAX5547 outputs to sink higher current (up to 7.2m A max). Operating from a single +2.7V to +5.25V supply, the MAX5547 typically consumes 1m A (internal reference). The MAX5547 operates from a precision +2.5V internal 4ppm/°C reference or an external reference in the +2.45V to +2.55V range. The maximum full-scale current-sink range is software programmable to 3.6m A or 1.2m A for each DAC. A 10MHz SPI™-patible serial interface configures the device. The MAX5547 is available in a 3mm x 3mm x 0.8mm 8pin TDFN package and is specified over the -40°C to +85°C extended temperature range. - Dual Current-Sink DACs - 10-Bit Resolution - Two Software-Programmable Full-Scale Current Ranges: 3.6m A or 1.2m A - Parallelable Outputs for Up to 7.2m A (max) - +2.5V Internal Reference Drifts Only 4ppm/°C - +2.7V to +5.25V Single-Supply Operation - INL: ±4 LSB (1.2m A Output) - DNL: ±0.75 LSB (Guaranteed Monotonic) - Low +0.8V Output pliance - Ultra-Small, 3mm x 3mm x 0.8mm, 8-Pin TDFN Package Features Applications Laser-Driver Control Pin-Diode Bias Currents Modulation Currents Average Power Extinction Ratios PART Ordering Information TEMP RANGE PINPACKAGE TOP MARK APF PKG CODE T833-2 MAX5547ETA -40°C to +85°C 8 TDFN-EP- - EP = Exposed pad. Pin Configuration appears at end of data sheet. Typical Operating Circuit +2.5V +2.7V TO +5.25V +3.3V +3.3V VDD I OUTA MODSET OUT- MAX3736 OUT+ I OUTB...