MAX6392 - Dual Voltage uP Supervisory Circuits

Product Overview

Maxim Integrated Products

Datasheet Details

Part number	MAX6392
Manufacturer	Maxim Integrated Products
File Size	193.73 KB
Description	Dual Voltage uP Supervisory Circuits
Datasheet	MAX6392 Datasheet
Additional preview pages of the MAX6392 datasheet.

Product details

Description

The MAX6391/MAX6392 microprocessor (µP) supervisory circuits provide sequenced logic reset outputs for multicomponent or dual-voltage systems.

Each device can monitor two supply voltages and time-sequence two reset outputs to control the order in which system components are turned on and off.

Features

o Preset VCC Reset Threshold Voltages from 1.58V to 4.63V (master supply) o Customer-Adjustable RESET IN2 to Monitor Voltages Down to 625mV (secondary supply) o Fixed (140ms min) RESET1 Timeout o Fixed (140ms min) or Customer-Adjustable RESET2 Timeout Period o Guaranteed Reset Valid to VCC = 1V o Active-Low Open-Drain Outputs or PushPull/Open-Drain Combination o Internal Open-Drain Pullup Resistors (for external VOH voltage connections) o Manual Reset Input (MAX6392 only) o Immune to Short Negat.

📁 Similar Datasheet

MAX639 - Step-Down DC-DC Converters (Maxim)
MAX6399 - Protection Switch Controller (Maxim)
MAX630 - CMOS Micropower Step-UP Switching Regulator (Maxim)
MAX6301 - Low-Power uP Supervisory Circuits (Maxim)
MAX6302 - Low-Power uP Supervisory Circuits (Maxim)
MAX6303 - Low-Power uP Supervisory Circuits (Maxim)
MAX6304 - Low-Power uP Supervisory Circuits (Maxim)
MAX6305 - Programmable Reset (Maxim Integrated)

Other Datasheets by Maxim Integrated Products

MAX6390 - Low-Power uP Reset Circuits
MAX6391 - Dual Voltage uP Supervisory Circuits
MAX6397 - Overvoltage Protection Switch/Limiter Controllers
MAX6398 - Overvoltage Protection Switch/Limiter Controllers
MAX6342 - 6-Pin uP Reset Circuit
MAX6343 - 6-Pin uP Reset Circuit

Published: May 18, 2006 |