Datasheet4U Logo Datasheet4U.com

MAX7060 - 280MHz to 450MHz Programmable ASK/FSK Transmitter

General Description

The MAX7060 frequency and power-programmable ASK/FSK transmitter operates at 280MHz to 450MHz frequencies.

Key Features

  • S Fully Integrated, Fast Fractional-N PLL 280MHz to 450MHz RF Frequency Frequency Range 100% Tested at +125NC < 250µs Startup Time Adjustable FSK Mark and Space Frequencies Ultra-Clean FSK Modulation 50kbps Manchester Data Rate ASK 70kbps Manchester Data Rate FSK S Programmable Power Amplifier +14dBm Tx Power with 5V Supply +10dBm Tx Power at 2.1V Supply 28dB Power-Control Range in 1dB Steps S Tunable PA Matching Capacitor S Control Through SPI or Manual Settings S Low S.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX706 uP Supervisory Circuit ART CHIP
MAX706 Low-Cost / uP Supervisory Circuits Maxim Integrated
MAX706AP Low-Cost uP Supervisory Circuits Maxim Integrated
MAX706AR Low-Cost uP Supervisory Circuits Maxim Integrated
MAX706AS Low-Cost uP Supervisory Circuits Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX7030 ASK Transceiver
MAX7031 ASK Transceiver
MAX7032 ASK/FSK Transceiver
MAX7033 315MHz/433MHz ASK Superheterodyne Receiver
MAX7034 315MHz/434MHz ASK Superheterodyne Receiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-5096; Rev 0; 2/10 www.DataSheet4U.com 280MHz to 450MHz Programmable ASK/FSK Transmitter General Description The MAX7060 frequency and power-programmable ASK/FSK transmitter operates at 280MHz to 450MHz frequencies. This device incorporates a fully integrated fractional-N synthesizer, which allows the user to set the RF operating frequency to a large fraction of the 280MHz to 450MHz frequency range with a single crystal. For example, the MAX7060 can be tuned from 285MHz to 420MHz with a 15MHz crystal. The RF output power is user-controlled between +14dBm and -14dBm, with a 5V supply or with battery voltages as low as 3.2V. At the minimum specified battery voltage of 2.1V, the RF output power-control range is between +10dBm and -14dBm.