Datasheet4U Logo Datasheet4U.com

MAX7381 - 3-Pin Silicon Oscillator

General Description

The MAX7381 is a silicon oscillator intended as a low-cost improvement to ceramic resonators, crystals, and crystal oscillator modules as the clock source for microcontrollers and UARTs in 3V, 3.3V, and 5V applications.

Key Features

  • MAX7381.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX7382 Silicon Oscillator with Reset Output Maxim
MAX7383 Silicon Oscillator with Low-Power Frequency Switching Maxim
MAX7389 Microcontroller Clock Generator Maxim Integrated
MAX738A Current-Mode PWM DC-DC Converters Maxim Integrated
MAX730 5V / Step-Down / Current-Mode PWM DC-DC Converters Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX738 (MAX730 / MAX738 / MAX750 / MAX758) Step Down Current Mode PWM Regulators
MAX7384 Silicon Oscillator
MAX7387 System Monitoring Oscillator
MAX7388 System Monitoring Oscillator
MAX7310 2-Wire-Interfaced 8-Bit I/O Port Expander

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3697; Rev 0; 4/05 3-Pin Silicon Oscillator General Description The MAX7381 is a silicon oscillator intended as a low-cost improvement to ceramic resonators, crystals, and crystal oscillator modules as the clock source for microcontrollers and UARTs in 3V, 3.3V, and 5V applications. The MAX7381 is an integrated oscillator, supplied at specific frequencies, just like crystals and resonators, and with a rail-to-rail, 50%, duty-cycle square-wave output. The oscillator frequency is generated directly without the use of a phase-locked loop (PLL). No additional components are required for setting or adjusting the frequency. www.DataSheet4U.com Unlike typical crystal and ceramic resonator oscillator circuits, the MAX7381 is resistant to vibration and EMI.