Datasheet4U Logo Datasheet4U.com

MAX8716 - Dual Power-Supply Controller

General Description

The MAX8716/MAX8717/MAX8756/MAX8757 are dual, step-down, interleaved, fixed-frequency, switch-mode power-supply (SMPS) controllers with synchronous rectification.

Key Features

  • o Fixed Switching Frequency 200kHz, 300kHz, or 500kHz 250kHz, 300kHz, or 400kHz (MAX8756 Only) o No Current-Sense Resistor Required o 40/60 Optimal Interleaving o Reduced Input-Capacitor Requirement o Output Voltage Fixed or Adjustable Outputs (Dual Mode™) 3.3V/5V Fixed or 1V to 5.5V Adjustable 1.5V/1.8V Fixed or 1V to 2.3V Adjustable (MAX8756 Only) o 4V to 26V Input Range o Independently Selectable PWM, Skip, and LowNoise Mode Operation o Soft-Start and Soft-Stop o 2V Precision Reference with 0.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX871 Switched-Capacitor Voltage Inverters Maxim
MAX870 Switched-Capacitor Voltage Inverters Maxim
MAX872 Precision Voltage References Maxim
MAX8720 Dynamically Adjustable 6-Bit VID Step-Down Controller Maxim
MAX8723 Step-Down Regulator Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX8710 Low-Cost Linear-Regulator LCD Panel Power Supplies
MAX8711 Low-Cost Linear-Regulator LCD Panel Power Supplies
MAX8712 Low-Cost Linear-Regulator LCD Panel Power Supplies
MAX8713 Simplified Multichemistry SMBus Battery Charger
MAX8715 Low-Noise Step-Up DC-DC Converters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3569; Rev 2; 4/07 EVAALVUAAILTAIOBNLEKIT Interleaved High-Efficiency, Dual Power-Supply Controllers for Notebook Computers MAX8716/MAX8717/MAX8756/MAX8757 General Description The MAX8716/MAX8717/MAX8756/MAX8757 are dual, step-down, interleaved, fixed-frequency, switch-mode power-supply (SMPS) controllers with synchronous rectification. The MAX8716/MAX8717/MAX8756/MAX8757 are intended for main (5V/3.3V) power generation, while the MAX8756 is optimized for I/O power rails in batterypowered systems. Fixed-frequency operation with optimal interleaving minimizes input ripple current from the lowest input voltages up to the 26V maximum input. Optimal 40/60 interleaving allows the input voltage to go down to 8.3V before duty-cycle overlap occurs in 5V/3.