Datasheet4U Logo Datasheet4U.com

MAX8751 - Full-Bridge CCFL Inverter Controller

General Description

The MAX8751 cold-cathode-fluorescent lamp (CCFL) inverter controller is designed to drive multiple CCFLs using the fixed-frequency, full-bridge inverter topology.

The MAX8751 operates in resonant mode during striking and switches over to constant-frequency operation after all the lamps are lit.

Key Features

  • that effectively protect against many single-point fault conditions, including lamp-out and short-circuit conditions. The MAX8751 achieves a 10:1 dimming range by “chopping” the lamp current on and off using the digital pulsewidth modulation (DPWM) method. The DPWM frequency can be accurately adjusted with a resistor or synchronized to an external signal. The brightness is controlled by an analog voltage on the CNTL pin. The MAX8751 is capable of synchronizing and adjusting the phase of the ga.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX875 Low-Power / Low-Drift / +2.5V/+5V/+10V Precision Voltage References Maxim
MAX8752 TFT LCD Step-Up DC-DC Converter Maxim Integrated
MAX8756 Dual Power-Supply Controller Maxim Integrated
MAX870 Switched-Capacitor Voltage Inverters Maxim
MAX871 Switched-Capacitor Voltage Inverters Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX8757 Dual Power-Supply Controller
MAX8758 Step-Up Regulator
MAX8759 CCFL Backlight Controller
MAX8702 Dual-Phase MOSFET Drivers
MAX8703 Dual-Phase MOSFET Drivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX8751 EVALUATION KIT AVAILABLE Fixed-Frequency, Full-Bridge CCFL Inverter Controller General Description The MAX8751 cold-cathode-fluorescent lamp (CCFL) inverter controller is designed to drive multiple CCFLs using the fixed-frequency, full-bridge inverter topology. The MAX8751 operates in resonant mode during striking and switches over to constant-frequency operation after all the lamps are lit. This unique feature ensures reliable striking under all conditions and reduces the transformer stress. The MAX8751 can drive large power MOSFETs typically used in applications where one power stage drives four or more CCFL lamps in parallel. An internal 5.35V linear regulator powers the MOSFET drivers and most of the internal circuitry.