MAX8795A Datasheet | Maxim Integrated

19-0793; Rev 1; 6/07 KIT ATION EVALU E L B AVAILA TFT-LCD DC-DC Converter with Operational Amplifiers General Description Features o 2.5V to 5.5V Input Supply Range o 1.2MHz Current-Mode Step-Up Regulator Fast Transient Response to Pulsed Load High-Accuracy Output Voltage (1%) Built-In 20V, 3A, 0.16Ω n-Channel MOSFET High Efficiency (85%) o Linear-Regulator Controllers for VGON and VGOFF o High-Performance Operational Amplifiers ±130m A Output Short-Circuit Current 45V/µs Slew Rate 20MHz, -3d B Bandwidth Rail-to-Rail Inputs/Outputs o Logic-Controlled, High-Voltage Switch with Adjustable Delay o Timer-Delay Fault Latch for All Regulator Outputs o Thermal-Overload Protection o 0.6m A Quiescent Current The MAX8795A includes a high-performance step-up regulator, two linear-regulator controllers, and five highcurrent operational amplifiers for active-matrix, thin-film transistor (TFT), liquid-crystal displays (LCDs). Also included is a logic-controlled, high-voltage switch with adjustable delay. The step-up DC-DC converter provides the regulated supply voltage for the panel source driver ICs. The converter is a high-frequency (1.2MHz) current-mode regulator with an integrated 20V n-channel MOSFET that allows the use of ultra-small inductors and ceramic capacitors. It provides fast transient response to pulsed loads while achieving efficiencies over 85%. The gate-on and gate-off linear-regulator controllers provide regulated TFT gate-on and gate-off supplies using external charge pumps attached to the switching node. The MAX8795A includes five high-performance operational amplifiers. These amplifiers are designed to drive the LCD backplane (V) and/or the gammacorrection divider string. The device Features high output current (±130m A), fast slew rate (45V/µs), wide bandwidth (20MHz), and rail-to-rail inputs and outputs. The MAX8795A is available in a lead-free, 32-pin, thin QFN package with a maximum thickness of 0.8mm for ultra-thin LCD panels, as well as...