Datasheet4U Logo Datasheet4U.com

MAX8892 - (MAX8891 / MAX8892) 150mA Linear Regulators

Download the MAX8892 datasheet PDF. This datasheet also covers the MAX8891 variant, as both devices belong to the same (max8891 / max8892) 150ma linear regulators family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX8891/MAX8892 low-dropout (LDO) linear regulators are designed to deliver up to 150mA continuous output current.

These regulators achieve a low 120mV dropout for 120mA load current.

The MAX8891 only requires an input/output capacitor, hence achieving the smallest PCB area.

Key Features

  • MAX8891/MAX8892 Ordering Information PART.
  • MAX8891EXKxy+T MAX8892EXK+T TEMP RANGE -40°C to +85°C -40°C to +85°C PIN-.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX8891_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX889 High-Frequency / Regulated / 200mA / Inverting Charge Pump Maxim
MAX8890 Integrated Cellular RF-Section Power-Management Maxim
MAX8895V Li-Ion Chargers Maxim Integrated
MAX8895W Li-Ion Chargers Maxim Integrated
MAX8895X Li-Ion Chargers Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX8891 (MAX8891 / MAX8892) 150mA Linear Regulators
MAX8893A uPMICs
MAX8893B uPMICs
MAX8893C uPMICs
MAX8896 Dual PWM Step-Down Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-4537; Rev 0; 3/09 www.DataSheet4U.com High PSRR, Low-Dropout, 150mA Linear Regulators General Description The MAX8891/MAX8892 low-dropout (LDO) linear regulators are designed to deliver up to 150mA continuous output current. These regulators achieve a low 120mV dropout for 120mA load current. The MAX8891 only requires an input/output capacitor, hence achieving the smallest PCB area. The MAX8892’s output voltage can be adjusted with an external divider. The MAX8891 is preset to a variety of voltages in the 1.5V to 4.5V range. Designed with a p-channel MOSFET series pass transistor, the MAX8891/MAX8892 maintain very low ground current (40µA). The regulators are designed and optimized to work with low-value, low-cost ceramic capacitors.