Datasheet4U Logo Datasheet4U.com

MAX8903B - 1-Cell Li+ DC-DC Charger

General Description

The MAX8903B is an integrated 1-cell Li+ charger and Smart Power Selector™ with dual (AC adapter and USB) power inputs.

The switch mode charger uses a high switching frequency to eliminate heat and allow for tiny external components.

Key Features

  • optimized smart power control to make the best use of limited USB or adapter power. Battery charge current and SYS output current limit are independently set. Power not used by the system charges the battery. Charge current and SYS output current limit can be set up to 2A, while USB input current can be set to 100mA or 500mA. Automatic input selection switches the system load from battery to external power. The DC input operates from 4.15V to 16V with up to 20V protection, while the USB input ha.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX8903C 2A 1-Cell Li+ DC-DC Charger Maxim Integrated
MAX8903D 2A 1-Cell Li+ DC-DC Charger Maxim Integrated
MAX8903E 2A 1-Cell Li+ DC-DC Charger Maxim Integrated
MAX8903G 2A 1-Cell Li+ DC-DC Charger Maxim Integrated
MAX8903H 2A 1-Cell Li+ DC-DC Charger Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX8903A 2A 1-Cell Li+ DC-DC Charger
MAX8900A 1.2A Switch-Mode Li+ Chargers
MAX8900B 1.2A Switch-Mode Li+ Chargers
MAX8900C 1.2A Switch-Mode Li+ Chargers
MAX8901A Highest Efficiency Supply

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX8903B 19-4502; Rev 1; 11/09 EVAALVUAAILTAIOBNLEKIT 2A, 1-Cell Li+ DC-DC Charger for USB and Adapter Power General Description The MAX8903B is an integrated 1-cell Li+ charger and Smart Power Selector™ with dual (AC adapter and USB) power inputs. The switch mode charger uses a high switching frequency to eliminate heat and allow for tiny external components. It can operate with either separate inputs for USB and AC adapter power, or from a single input that accepts both. All power switches for charging and switching the load between battery and external power are included on-chip. No external MOSFETs, blocking diodes, or current-sense resistors are required. The MAX8903B features optimized smart power control to make the best use of limited USB or adapter power.