Datasheet4U Logo Datasheet4U.com

MAX9598 - Low-Power Audio/Video Switch

Key Features

  • o 70mW Quiescent Power Consumption o 1.7mW Low-Power Mode Consumption o 0.1mW Shutdown Consumption o Clickless/Popless, DirectDrive Audio o Video Input Detection o Video Load Detection o Video Reconstruction Filter with 10MHz Passband and 52dB Attenuation at 27MHz o 3.3V and 12V Supply Voltages MAX9598 The MAX9598 dual SCART matrix routes audio and video signals between a set-top box decoder chip and two external SCART connectors under I2C control. Operating from a 3.3V supply and a 12V supply.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX9509 DirectDrive Video Filter Amplifiers Maxim Integrated
MAX951 Single-Supply Op Amp + Comparator + Reference Maxim
MAX9510 DirectDrive Video Filter Amplifiers Maxim Integrated
MAX952 Single-Supply Op Amp + Comparator + Reference Maxim
MAX953 Single-Supply Op Amp + Comparator + Reference Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX9590 14 Programmable Gamma Reference Buffers
MAX9595 Audio/Video Switch
MAX9597 Low-Power Audio/Video Interface
MAX9500 Triple-Channel HDTV Filters
MAX9501 Triple-Channel HDTV Filters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3209; Rev 0; 2/08 KIT ATION EVALU E L B A AVAIL Low-Power Audio/Video Switch for Dual SCART Connectors www.datasheet4u.com General Description Features o 70mW Quiescent Power Consumption o 1.7mW Low-Power Mode Consumption o 0.1mW Shutdown Consumption o Clickless/Popless, DirectDrive Audio o Video Input Detection o Video Load Detection o Video Reconstruction Filter with 10MHz Passband and 52dB Attenuation at 27MHz o 3.3V and 12V Supply Voltages MAX9598 The MAX9598 dual SCART matrix routes audio and video signals between a set-top box decoder chip and two external SCART connectors under I2C control. Operating from a 3.3V supply and a 12V supply, the MAX9598 consumes 70mW during quiescent operation and 471mW during average operation when driving typical signals into typical loads.