MAX9778 Datasheet | Maxim Integrated

19-0509; Rev 0; 4/06 .. Stereo 3W Audio Power Amplifiers with Headphone Drive and Input Mux General Description The MAX9777/MAX9778 bine a stereo 3W bridgetied load (BTL) audio power amplifier, stereo singleended (SE) headphone amplifier, headphone sensing, and a 2:1 input multiplexer all in a tiny 28-pin thin QFN package. These devices operate from a single 4.5V to 5.5V supply and feature an industry-leading 100d B PSRR, allowing these devices to operate from noisy supplies without the addition of a linear regulator. An ultra-low 0.002% THD+N ensures clean, low-distortion amplification of the audio signal. Patented click-andpop suppression minimizes audible transients on power and shutdown cycles. Power-saving Features include low 4m V VOS (minimizes DC current drain through the speakers), low 13m A supply current, and a 10µA shutdown mode. A MUTE function allows the outputs to be quickly enabled or disabled. A headphone sense input detects the presence of a headphone jack and automatically configures the amplifiers for either speaker or headphone mode. In speaker mode, the amplifiers can deliver up to 3W of continuous average power into a 3Ω load. In headphone mode, the amplifier can deliver up to 200m W of continuous average power into a 16Ω load. The gain of the amplifiers is externally set, allowing maximum flexibility in optimizing output levels for a given load. The amplifiers also feature a 2:1 input multiplexer, allowing multiple audio sources to be selected. The multiplexer can also be used to pensate for limitations in the frequency response of the loud speakers by selecting an external equalizer network. The various functions are controlled by either an I2C†-patible (MAX9777) or simple parallel control interface (MAX9778). The MAX9777/MAX9778 are available in a thermally efficient 28-pin thin QFN package (5mm x 5mm x 0.8mm). These devices have thermal-overload protection (OVP) and are specified over the extended -40°C to +85°C...