DS1099 Datasheet | Maxim Integrated

Low-Frequency Dual Econ Oscillator General Description The DS1099 is a low-cost, low-power, low-frequency silicon oscillator that generates two square-wave outputs with frequencies between 0.25Hz and 1.048MHz. Individual output enables allow both outputs to be enabled/disabled independently. Both outputs are capable of sinking 16m A, allowing them to directly interface to light-emitting diodes (LEDs) as well as other external circuitry. The DS1099 operates over a wide supply voltage, making it suitable for both 3V and 5V systems. The device is shipped from the factory custom programmed and calibrated, ready to be inserted into the end application. Contact the factory for custom frequencies or requirements. Applications - - Flashing LED Status Indicators - - Consumer Appliances - - Servers - - Printers - - Switch-Mode Power Supplies Features - - Low-Cost, Low-Frequency Econ Oscillator™ with Dual Outputs - - Factory Programmed - - Output Frequencies Independently Programmable from 0.25Hz to 1.048MHz - - 2.7V to 5.5V Single-Supply Operation - - No External Timing ponents Required - - Independent Output Enables - - CMOS/TTL-patible Outputs - - Oscillator Outputs Capable of Sinking 16m A to Directly Drive LEDs - - Relieves Microprocessor of Periodic Interrupt - - Low-Power Consumption - - Operating Temperature Range: -40°C to +125°C - - ±100ppm/°C Temp Drift (max) Ordering Information PART TEMP RANGE PIN-PACKAGE DS1099U- a O a 1 -40°C to +125°C 8 µSOP - Where α 0 and α 1 specify the factory-programmed divider settings for OUT0 and OUT1,...