DS1339B Datasheet | Maxim Integrated

EVALUATION KIT AVAILABLE Low-Current, I2C, Serial Real-Time Clock for High-ESR Crystals General Description The DS1339B serial real-time clock (RTC) is a lowpower clock/date device with two programmable timeof-day alarms and a programmable square-wave output. Address and data are transferred serially through an I2C bus. The clock/date provides seconds, minutes, hours, day, date, month, and year information. The date at the end of the month is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. The device has a built-in power-sense circuit that detects power failures and automatically switches to the backup supply, maintaining time, date, and alarm operation. Applications - Handhelds (GPS, POS Terminals) - Consumer Electronics (Set-Top Box, Digital Recording, Network Appliance) - Office Equipment (Fax/Printers, Copier) - Medical (Glueter, Medicine Dispenser) - Telemunications (Routers, Switches, Servers) - Other (Utility Meter, Vending Machine, Thermostat, Modem) Functional Diagram Benefits and Features - - Drop-In Replacement for DS1339 - - Supports High-ESR Crystals Up to 100kΩ to Allow Crystals to be Optimized for Cost and Space - - pletely Manages All Timekeeping Functions - Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year with Leap-Year pensation Valid Up to 2200 - Two Time-of-Day Alarms - Programmable Square-Wave Output Signal - - Low-Power Operation Extends Battery Backup Run Time - Automatic Power-Fail Detect and Switch Circuitry - - Simple Serial Port Interfaces to Most Microcontrollers - I2C Serial Interface - - Underwriters Laboratories (UL®) Recognized Ordering Information appears at end of data sheet. UL is a registered trademark of Underwriters Laboratories Inc. 32.768k Hz 8.192k Hz 4.096k...