Maxim Integrated DS1624
The DS1624 consists of two separate functional units: a 256-byte nonvolatile E2 memory and a direct-to-digital temperature sensor. The nonvolatile memory is made up of 256 bytes of E2 memory. This memory can be used to store any type of information the user wishes.| Part No. | DS1624 |
|---|---|
| Datasheet | DS1624 Download |
| Manufacturer |  Maxim Integrated |
| Description | Digital Thermometer/Memory |
| Buy | Stock & Price |
GENERAL DESCRIPTION
These memory locations are accessed through the 2-wire serial bus. The direct-to-digital temperature sensor allows the DS1624 to measure the ambient temperature and report the temperature in a 12-bit word with 0.0625°C resolution. The temperature sensor and its related registers are accessed through the 2-wire serial interface. Figure 1 shows a block diagram of the DS1624. Benefits andFEATURES
●● Reduces Component Count with Integrated Temperature Sensor and Nonvolatile E2 Memory● Measures Temperatures from -55°C to +125°C in 0.0625°C Increments
● ±0.5°C Accuracy from 0°C to 70°C
● 256 Bytes of E2 Memory for Storing Information Such as Frequency Compensation Coefficients
● No External Components
●● Easy-to-Use 2-Wire Serial Interface
● Temperature is Read as a 12-Bit Value (2-Byte Transfer)
●● Available in 8-Pin SO and DIP Packages Figure 1. Block Diagram Ordering Information appears at end of data sheet. VDD SCL SDA A0 ADDRESS AND A1 I/O CONTROL A2 GND STATUS REG...
