Datasheet4U Logo Datasheet4U.com

DS1805 - Addressable Digital Potentiometer

General Description

The DS1805 addressable digital potentiometer contains a single 256-position digitally controlled potentiometer.

Device control is achieved through a 2-wire serial interface.

Device addressing is provided through three address inputs that allow up to eight devices on a single 2-wire bus.

Key Features

  • o 3V or 5V Operation o Low Power Consumption o One Digitally Controlled, 256-Position Potentiometer o Compatible with DS1803-Based Designs o 14-Pin TSSOP (173mil) and 16-Pin SO (150mil) Available for Surface-Mount.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS1800 Dual Inverting Log Gain/Attenuator Dallas Semiconducotr
DS1800-3 AC-DC / Distributed Power Front-End 1U Emerson
DS1801 Dual Audio Taper Potentiometer Dallas Semiconducotr
DS1802 Dual Audio Taper Potentiometer Dallas Semiconducotr
DS1806 Digital Sextet Potentiometer Dallas Semiconducotr

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
DS1803 Addressable Dual Digital Potentiometer
DS1804 Nonvolatile Trimmer Potentiometer
DS1808 Dual Log Digital Potentiometer
DS1809 Dallastat
DS1813 5V EconoReset

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS1805 Rev 1; 9/06 Addressable Digital Potentiometer General Description The DS1805 addressable digital potentiometer contains a single 256-position digitally controlled potentiometer. Device control is achieved through a 2-wire serial interface. Device addressing is provided through three address inputs that allow up to eight devices on a single 2-wire bus. The exact wiper position of the potentiometer can be written or read. The DS1805 is available in 16-pin SO and 14-pin TSSOP packages. The device is available in three standard resistance values: 10kΩ, 50kΩ, and 100kΩ. The DS1805 is specified over the industrial temperature range. The DS1805 provides a low-cost alternative for designs based on the DS1803, but require only a single potentiometer.