GENERAL DESCRIPTION
A wide variety of applications are supported through internal termination or external termination. A single bill of material can support E1/T1/J1 with minimum external components. Redundancy is supported through nonintrusive monitoring, optimal high-impedance modes, and configurable 1:1 or 1+1 backup enhancements. An on-chip synthesizer generates the E1/T1/J1 clock rates by a single master clock input of various frequencies. Two clock output references are also offered. FEATURES
8 Complete E1, T1, or J1 Short-Haul Line Interface Units Independent E1, T1, or J1 Selections Internal Software-Selectable Transmit and Receive-Side Termination Crystal-Less Jitter Attenuator Selectable Single-Rail and Dual-Rail Mode and AMI or HDB3/B8ZS Line Encoding and Decoding Detection and Generation of AIS Digital/Analog Loss-of-Signal Detection as per T1.231, G.775, and ETS 300 233 External Master Clock can be Multiple of 2.048MHz or 1.544MHz for T1/J1 or E1 Operation; This Clock will...
Maxim Integrated
