DS33R11 Datasheet PDF | Maxim Integrated

Maxim Integrated DS33R11

The DS33R11 extends a 10/100 Ethernet LAN segment by encapsulating MAC frames in HDLC or X.86 (LAPS) for transmission over a T1/E1/J1 data stream. The device performs store-and-forward of packets with full wire-speed transport capability. The built-in Committed Information Rate (CIR) Controller provides fractional bandwidth allocation up to the line rate in increments of 512kbps.

Part No.	DS33R11
Datasheet	DS33R11 Download
Manufacturer	Maxim Integrated
Description	Ethernet Mapper
Buy	Stock & Price

GENERAL DESCRIPTION

The DS33R11 can operate with an inexpensive external processor.

FEATURES

§ § § § § § § § § § 10/100 IEEE 802.3 Ethernet MAC (MII and RMII) Half/Full Duplex with Automatic Flow Control Integrated T1/E1/J1 Framer and LIU HDLC/LAPS Encapsulation with Programmable FCS and Interframe Fill Committed Information Rate Controller Provides Fractional Allocations in 512kbps Increments Programmable BERT for Serial (TDM) Interface External 16MB, 100MHz SDRAM Buffering Parallel Microprocessor Interface 1.8V, 3.3V Supplies Reference Design Routes on Two Signal Layers IEEE 1149.1 JTAG Support

APPLICATIONS

Transparent LAN Service LAN Extension Ethernet Delivery Over T1/E1/J1 FUNCTIONAL DIAGRAM T1/E1/J1 TRANSCEIVER T1/E1 LINE

FEATURES

continued on page 11. SERIAL STREAM ORDERING INFORMATION PART DS33R11 TEMP RANGE -40°C to +85°C PIN-PACKAGE 256 BGA BERT HDLC/X.86 MAPPER mC SDRAM 10/100 MAC MII/RMII 10/100 ETHERNET PHY DS33R11 Note: Some revisions of this device may incorporate deviations from published specifications known as errata.