Maxim Integrated DS8007
The DS8007 multiprotocol dual smart card interface is a low-cost, dual smart card reader interface supporting all ISO 7816, EMV, and GSM11-11 requirements. The card interface is controlled by internal sequencers that support automatic activation and deactivation sequencing, handling all actions required for T = 0, T = 1, and synchronous protocols. Through its 8-bit parallel bus and dedicated address selects (AD3–AD0), the DS8007 can easily and directly connect to the nonmultiplexed byte-wide bus of a Maxim/Dallas secure microcontroller.
| Part No. |
DS8007 |
| Datasheet |
DS8007
Download
|
| Manufacturer |
 Maxim Integrated |
| Description |
multiprotocol dual smart card interface |
| Buy |
Stock & Price
|
GENERAL DESCRIPTION
Optionally, the parallel bus can be multiplexed to allow direct access to the multiplexed bus of an 80C51-compatible microcontroller through MOVX memory addressing. One integrated UART is multiplexed among the interfaces to allow high-speed automatic smart card processing with each card-possessing, independent, variable, baud-rate capability. Emergency deactivation is also supported in case of supply dropout. A third card is supported through the auxiliary I/O. The same set of I/O can optionally be used as additional serial interface for the UART. The DS8007 provides all electrical signals necessary to interface with two smart cards. The integrated voltage converter ensures full cross-compatibility between 1.8V/ 3V/5V cards and a 1.8V/3V/5V environment, and allows operation within a 2.7V to 6V supply voltage range. FEATURES
♦ Complete Interface/Control for Two Separate Smart Card Devices ♦ 6kV (min) ESD Protection on Card Interfaces ♦ Internal IC Card Supply Voltage...
