MAX1201 Datasheet PDF | Maxim Integrated

Maxim Integrated MAX1201

The MAX1201 is a 14-bit, monolithic, analog-to-digital converter (ADC) capable of conversion rates up to 2.2Msps. This integrated circuit, built on a CMOS process, uses a fully differential, pipelined architecture with digital error correction and a short self-calibration procedure that corrects for capacitor and gain mismatches and ensures 14-bit linearity at full sample rates. The MAX1201 operates from a single +5V supply.

Part No.	MAX1201
Datasheet	MAX1201 Download
Manufacturer	Maxim Integrated
Description	14-Bit Self-Calibrating ADC
Buy	Stock & Price

GENERAL DESCRIPTION

FEATURES

o Monolithic 14-Bit, 2.2Msps ADC o Signal-to-Noise Ratio of 83dB o Spurious-Free Dynamic Range of 91dB o Differential Nonlinearity Error: ±0.3LSB o Integral Nonlinearity Error: ±1.2LSB o Single +5V Analog Supply, +3V Digital Supply o Low Power Dissipation: 269mW o On-Demand Self-Calibration o Three-State, Two’s Complement Output Data MAX1201 An on-chip track-and-hold (T/H) maintains superb dynamic performance up to the Nyquist frequency. The MAX1201 operates from a single +5V supply. The fully differential inputs allow an input swing of ±VREF. A single-ended input is also possible using two operational amplifiers. The reference is also differential with the positive reference (RFPF) typically connected to +4.096V and the negative reference (RFNF) tied to analog ground. Additional sensing pins (RFPS, RFNS) are provided to compensate for any resistive divider action that may occur due to finite internal and external resistances. The power dissipation is typically only 269mW at +5V and a sampling rate of 2.2Msps.