Datasheet4U Logo Datasheet4U.com

MAX12930 - Digital Isolators

General Description

The MAX12930/MAX12931 are a family of 2-channel, 3kV/5kVRMS digital galvanic isolators using Maxim’s proprietary process technology.

These devices transfer digital signals between circuits with different power domains while using as little as 0.65mW per channel at 1Mbps with 1.8V.

Key Features

  • two channels transferring data in the same direction. Both devices are available with a maximum data rate of either 25Mbps or 150Mbps and with the default outputs that are either high or low. The default is the state the output assumes when the input is not powered, or if the input is open-circuit. See the Ordering Information for suffixes associated with each option. Independent 1.71V to 5.5V supplies on each side of the isolator also make the devices suitable for use as level translators. The.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1290 250ksps / +3V / 8-/4-Channel / 12-Bit ADCs with +2.5V Reference and Parallel Interface Maxim
MAX12900 Ultra-Low-Power 4-20mA Sensor Transmitter Analog Devices
MAX1292 400ksps / +5V / 8-/4-Channel / 12-Bit ADCs with +2.5V Reference and Parallel Interface Maxim
MAX1294 12-Bit ADCs Maxim
MAX1295 12-Bit ADCs Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX1293 12-Bit ADCs
MAX12931 Digital Isolators
MAX12900 Ultra-Low-Power 4-20mA Sensor Transmitter
MAX1291 12-Bit ADCs
MAX1296 12-Bit ADCs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Click here for production status of specific part numbers. MAX12930/MAX12931 EVALUATION KIT AVAILABLE Two-Channel, Low-Power, 3kVRMS and 5kVRMS Digital Isolators General Description The MAX12930/MAX12931 are a family of 2-channel, 3kV/5kVRMS digital galvanic isolators using Maxim’s proprietary process technology. These devices transfer digital signals between circuits with different power domains while using as little as 0.65mW per channel at 1Mbps with 1.8V. The two channels of the MAX12931 transfer data in opposite directions, and this makes the MAX12931 ideal for isolating the TX and RX lines of a transceiver. The MAX12930 features two channels transferring data in the same direction.