Datasheet4U Logo Datasheet4U.com

MAX13051 - Fault-Protected Can Transceiver

General Description

The MAX13051 ±80V fault-protected CAN transceiver with autobaud is ideal for device net and other industrial network applications where overvoltage protection is required.

Key Features

  • three different modes of operation: high speed, slope control, and standby. Highspeed mode allows data rates up to 1Mbps. The slope-control mode can be used to program the slew rate of the transmitter for data rates of up to 500kbps, reducing the effects of EMI and allowing the use of unshielded-twisted or parallel cable. In standby mode, the transmitter shuts off and a low-power receiver monitors the bus, waiting for a wake-up signal. The MAX13051 provides a transmitter data (TXD) dominant time.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1305 8-/4-/2-Channel / 12-Bit / Simultaneous-Sampling ADCs Maxim
MAX13050 Industry-Standard High-Speed CAN Transceivers Maxim Integrated Products
MAX13052 Industry-Standard High-Speed CAN Transceivers Maxim Integrated Products
MAX13053 Industry-Standard High-Speed CAN Transceivers Maxim Integrated Products
MAX13054 Industry-Standard High-Speed CAN Transceivers Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX13000E Ultra-Low-Voltage Level Translators
MAX13001E Ultra-Low-Voltage Level Translators
MAX13002E Ultra-Low-Voltage Level Translators
MAX13003E Ultra-Low-Voltage Level Translators
MAX13004E Ultra-Low-Voltage Level Translators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX13051 ±80V Fault-Protected Can Transceiver with Autobaud General Description The MAX13051 ±80V fault-protected CAN transceiver with autobaud is ideal for device net and other industrial network applications where overvoltage protection is required. The MAX13051 provides a link between the CAN protocol controller and the physical wires of the bus lines in a control area network (CAN). The MAX13051 features three different modes of operation: high speed, slope control, and standby. Highspeed mode allows data rates up to 1Mbps. The slope-control mode can be used to program the slew rate of the transmitter for data rates of up to 500kbps, reducing the effects of EMI and allowing the use of unshielded-twisted or parallel cable.