Datasheet4U Logo Datasheet4U.com

MAX13085E - RS-485/RS-422 Transceiver

General Description

The MAX13085E +5.0V, ±15kV ESD-protected, RS-485/ RS-422 transceiver

Key Features

  • one driver and one receiver. The device includes fail-safe circuitry, guaranteeing a logic-high receiver output when receiver inputs are open or shorted. The receiver outputs a logic-high if all transmitters on a terminated bus are disabled (high impedance). The MAX13085E includes a hot-swap capability to eliminate false transitions on the bus during power-up or hot insertion. The MAX13085E features reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminate.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1308 8-/4-/2-Channel / 12-Bit / Simultaneous-Sampling ADCs Maxim
MAX13080E (MAX13080E - MAX13089E) RS-485/RS-422 Transceivers Maxim Integrated Products
MAX13081E (MAX13080E - MAX13089E) RS-485/RS-422 Transceivers Maxim Integrated Products
MAX13082E (MAX13080E - MAX13089E) RS-485/RS-422 Transceivers Maxim Integrated Products
MAX13084E (MAX13080E - MAX13089E) RS-485/RS-422 Transceivers Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX13000E Ultra-Low-Voltage Level Translators
MAX13001E Ultra-Low-Voltage Level Translators
MAX13002E Ultra-Low-Voltage Level Translators
MAX13003E Ultra-Low-Voltage Level Translators
MAX13004E Ultra-Low-Voltage Level Translators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX13085E 19-6016; Rev 0; 10/11 +5.0V, ±15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceiver General Description The MAX13085E +5.0V, ±15kV ESD-protected, RS-485/ RS-422 transceiver features one driver and one receiver. The device includes fail-safe circuitry, guaranteeing a logic-high receiver output when receiver inputs are open or shorted. The receiver outputs a logic-high if all transmitters on a terminated bus are disabled (high impedance). The MAX13085E includes a hot-swap capability to eliminate false transitions on the bus during power-up or hot insertion. The MAX13085E features reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free data transmission up to 500kbps.