Maxim Integrated MAX1421
The MAX1421 is a +3.3V, 12-bit analog-to-digital converter (ADC), featuring a fully-differential input, pipelined, 12-stage ADC architecture with wideband track-and-hold (T/H) and digital error correction incorporating a fully-differential signal path. The MAX1421 is optimized for low-power, high-dynamic performance applications in imaging and digital communications. The converter operates from a single +3.3V supply, consuming only 188mW while delivering a typical signal-to-noise ratio (SNR) of 66dB at an input frequency of 15MHz and a sampling frequency of 40Msps.
| Part No. |
MAX1421 |
| Datasheet |
MAX1421
Download
|
| Manufacturer |
 Maxim Integrated |
| Description |
12-Bit / 40Msps / +3.3V / Low-Power ADC |
| Buy |
Stock & Price
|
GENERAL DESCRIPTION
The fully-differential input stage has a small signal -3dB bandwidth of 400MHz and may be operated with single-ended inputs. An internal +2.048V precision bandgap reference sets the full-scale range of the ADC. A flexible reference structure accommodates an internal or externally applied buffered or unbuffered reference for applications requiring increased accuracy or a different input voltage range. In addition to low operating power, the MAX1421 features two power-down modes, a reference power-down and a shutdown mode. In reference power-down, the internal bandgap reference is deactivated, resulting in a typical 2mA supply current reduction. For idle periods, a full shutdown mode is available to maximize power savings. The MAX1421 provides parallel, offset binary, CMOScompatible three-state outputs. The MAX1421 is available in a 7mm x 7mm, 48-pin TQFP package, and is specified over the commercial (0°C to +70°C) and the extended industrial (-40°C to +85°C) temperature ranges.
