MAX14535E Datasheet PDF | Maxim Integrated

Maxim Integrated MAX14535E

The MAX14535E–MAX14539E are low on-resistance and high ESD-protected DPDT switches multiplex analog signals, such as AC-coupled audio or video. These devices combine the low on-capacitance (CON) and low on-resistance (R ON ) necessary for high-performance switching applications in portable electronics, and include an internal negative supply to pass audio signals that swing below ground (down to -1.5V). The MAX14535E/MAX14537E/MAX14539E feature internal shunt resistors on the normally open path (and normally closed path, (MAX14539E)) to reduce clicks and pops heard at the output.

Part No.	MAX14535E
Datasheet	MAX14535E Download
Manufacturer	Maxim Integrated
Description	DOCSIS 3.0 Upstream Amplifier
Buy	Stock & Price

GENERAL DESCRIPTION

The MAX14535E– MAX14539E have an enable input (EN) to reduce supply current and set all channels to high-impedance when driven low. When EN is driven low, the MAX14537E/MAX14538E have the lowest possible current consumption, but cannot withstand negative rail signals. The MAX14535E/MAX14536E/MAX14539E can still withstand a negative signal to NC_, NO_, or COM_ from -1.5V to min (VCC, 3V.) The MAX14535E–MAX14539E operate from a +2.4V to +5.5V supply. These devices can be powered from the typical analog supply voltage in a cell phone (+2.5V to +2.8V) or a lithium-ion (Li+) battery (about 4.3V max). The MAX14535E–MAX14539E have high ESD protection, up to ±15kV on COM_, and the NC_, NO_, and COM_ voltage can go up to 3.6V when VCC = 0V without damaging the devices. All devices are offered in a space-saving 10-pin, 1.4mm x 1.8mm UTQFN package, and operate over the -40°C to +85°C extended temperature range. ♦ Low 0.135Ω (typ) On-Resistance ♦ Low 0.3mΩ (typ) RON Flatness ♦...