Maxim Integrated MAX14913
the MAX14913 only supports configuration through SPI in serial setting mode. The MAX14912/MAX14913 are available in a 56-pin QFN 8mm x 8mm package.| Part No. | MAX14913 |
|---|---|
| Datasheet | MAX14913 Download |
| Manufacturer |  Maxim Integrated |
| Description | Switch/Push-Pull Driver |
| Buy | Stock & Price |
GENERAL DESCRIPTION
The MAX14912/MAX14913 have eight 640mA smart highside switches that can also be configured as push-pull drivers for high-speed switching. The propagation delay from input to switching of the high-side/low-side drivers is 1µs (max). Each high-side driver has a low on-resistance of 230mΩ (max) at 500mA load current at TA = 125°C. The device is configured and controlled either through pins or the SPI interface. The SPI interface is daisy-chainable, which allows efficient cascading of multiple devices. SPI also supports command mode, for the highest detailed diagnostic information. The MAX14912 allows configuration through SPI in parallel and serial setting modes, while Open-load detection in high-side mode detects both open-wire conditions in the switch on/off states, and LED drivers provide indication of per-channel fault and status conditions. Internal active clamps accelerate the shutdown of inductive loads fast in high-side mode.APPLICATIONS
●● Industrial Digital Outputs●● PLC Systems
●● Building Automation Ordering Information appears at end of data sheet.
