Datasheet4U Logo Datasheet4U.com

MAX14950 - Quad PCI Express Equalizer/Redriver

General Description

The MAX14950 is a quad equalizer/redriver designed to improve PCI Express® (PCIe) signal integrity by providing programmable input equalization at its receiver and programmable redrive circuitry.

The output circuitry reestablishes deemphasis lost on the board and compensates for circuit-board loss.

Key Features

  • electrical idle and receiver detection on each channel. It is optimized for PCIe Gen III (8.0GT/s) and Gen II (5.0GT/s) data rates, while still handling Gen I (2.5GT/s). The MAX14950 is available in a small, lead-free, 42-pin (3.5mm x 9.0mm) TQFN package for optimal layout and minimal space requirements. The device is specified over the 0NC to +70NC operating temperature range.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1495 3.5- and 4.5-Digit / Single-Chip ADCs Maxim
MAX149 +2.7V to +5.25V / Low-Power / 8-Channel / Serial 10-Bit ADCs Maxim
MAX1490A Complete / Isolated RS-485/RS-422 Data Interface Maxim
MAX1490B Complete / Isolated RS-485/RS-422 Data Interface Maxim
MAX1490E (MAX1480E / MAX1490E) Isolated RS-485/RS-422 Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX14954 Ruggedized Quad PCIe Redriver
MAX14955 Single-Lane PCIe Gen III Redriver
MAX14900E Octal Power Switch
MAX14906 Digital I/O
MAX14912 Switch/Push-Pull Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EVALUATION KIT AVAILABLE MAX14950 Quad PCI Express Equalizer/Redriver General Description The MAX14950 is a quad equalizer/redriver designed to improve PCI Express® (PCIe) signal integrity by providing programmable input equalization at its receiver and programmable redrive circuitry. The output circuitry reestablishes deemphasis lost on the board and compensates for circuit-board loss. The device permits optimal placement of key PCIe components. The device is useful with stripline, microstrip printed circuits, and balanced 100I cable. The device is tailored for PCIe and features electrical idle and receiver detection on each channel. It is optimized for PCIe Gen III (8.0GT/s) and Gen II (5.0GT/s) data rates, while still handling Gen I (2.5GT/s).