MAX16124 - Dual Pushbutton Controllers

Product Overview

Maxim Integrated

Datasheet Details

Part number	MAX16124
Manufacturer	Maxim Integrated
File Size	892.73 KB
Description	Dual Pushbutton Controllers
Datasheet	MAX16124 Datasheet
Note	This datasheet PDF includes multiple part numbers: MAX16124, MAX16122. Please refer to the document for exact specifications by model.
Additional preview pages of the MAX16124 datasheet.

Product details

Description

The MAX16122

MAX16125 pushbutton controllers with single-supply monitors monitor one or two pushbuttons and generate a hard reset signal if the buttons are pushed and held for a setup delay.

Features

Low Supply Current: < 5μA (typ) at 3V Over Temperature.
Precision Factory-Set VCC Monitoring Threshold for 1.8V, 2.5V, 3.3V, and 5V Supplies.
Fixed/Pin-Programmable or Resistor-Adjustable Pushbutton Setup Delay.
Up to 2 Reset Outputs and 2 Debounced Pushbutton Inputs.
Guaranteed RESET Valid for VCC Down to 0.95V.
Active-Low RESET Output (Push-Pull or Open-Drain).
Immune to Short Power-Supply Transients.
0.86mm x 1.2.

📁 Similar Datasheet

MAX1612 - Bridge-Battery Backup Controller (Maxim)
MAX16126 - Load-Dump/Reverse-Voltage Protector (Maxim Integrated Products)
MAX16127 - Load-Dump/Reverse-Voltage Protector (Maxim Integrated Products)
MAX161 - CMOS 8-Bit 8Channel Data Acquisition System (Maxim)
MAX1610 - Digitally Controlled CCFL Backlight Power Supplies (Maxim)
MAX1611 - Digitally Controlled CCFL Backlight Power Supplies (Maxim)
MAX1613 - Bridge-Battery Backup Controller (Maxim)
MAX1614 - High-Side / N-Channel MOSFET Switch Driver (Maxim)

Other Datasheets by Maxim Integrated

MAX16122 - Dual Pushbutton Controllers
MAX16123 - Dual Pushbutton Controllers
MAX16125 - Dual Pushbutton Controllers
MAX16128 - Load-Dump/Reverse-Voltage Protection Circuits
MAX16129 - Load-Dump/Reverse-Voltage Protection Circuits
MAX16132 - Single/Dual/Triple/Quad-Voltage uP Supervisors

Published: Jul 11, 2016 |