Datasheet4U Logo Datasheet4U.com

MAX16142 - nanoPower Tiny Supervisor

Download the MAX16142 datasheet PDF. This datasheet also covers the MAX16140 variant, as both devices belong to the same nanopower tiny supervisor family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX16140/MAX16142/MAX16144/MAX16146/ MAX16156/MAX16157/MAX16158/MAX16159 are ultralow-current, single-channel supervisory ICs that monitor the VCC voltage from 1.7V to 4.85V in approximately 50mV increments and asserts a reset when VCC voltage falls below the reset threshold.

Key Features

  • 370nA Quiescent Current, Extends Battery Life.
  • Edge/Level Trigger MR Input.
  • Factory-Set Reset Timeout Period.
  • MR Debounce Circuitry.
  • Factory-Set Threshold: 1.7V to 4.85V.
  • WLP and SOT23 Packages.
  • -40°C to +125°C Temperature Range Ordering Information appears at end of data sheet. Simplified Block Diagram 1.7V to 5.5V VCC MAX16140/MAX16142 MAX16144/MAX16146 MAX16156/MAX16157 MAX16158/MAX16159 MR GND RST VCC µP GND 19-100.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX16140-MaximIntegrated.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1614 High-Side / N-Channel MOSFET Switch Driver Maxim
MAX161 CMOS 8-Bit 8Channel Data Acquisition System Maxim
MAX1610 Digitally Controlled CCFL Backlight Power Supplies Maxim
MAX1611 Digitally Controlled CCFL Backlight Power Supplies Maxim
MAX1612 Bridge-Battery Backup Controller Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX16140 nanoPower Tiny Supervisor
MAX16144 nanoPower Tiny Supervisor
MAX16146 nanoPower Tiny Supervisor
MAX16122 Dual Pushbutton Controllers
MAX16123 Dual Pushbutton Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Click here for production status of specific part numbers. MAX16140/MAX16142/MAX16144/ MAX16146/MAX16156–MAX16159 nanoPower, Tiny Supervisor with Manual Reset Input General Description The MAX16140/MAX16142/MAX16144/MAX16146/ MAX16156/MAX16157/MAX16158/MAX16159 are ultralow-current, single-channel supervisory ICs that monitor the VCC voltage from 1.7V to 4.85V in approximately 50mV increments and asserts a reset when VCC voltage falls below the reset threshold. The reset output remains asserted for the reset timeout period after the VCC vthoeltaSgeelercistoersGaubidoevefotrheavfaaiclatobrley-rseesteVt CtimC_eToHut+oVptHioYnSs..