Datasheet4U Logo Datasheet4U.com

MAX16159 - nanoPower Tiny Supervisor

This page provides the datasheet information for the MAX16159, a member of the MAX16140 nanoPower Tiny Supervisor family.

Datasheet Summary

Description

The MAX16140/MAX16142/MAX16144/MAX16146/ MAX16156/MAX16157/MAX16158/MAX16159 are ultralow-current, single-channel supervisory ICs that monitor the VCC voltage from 1.7V to 4.85V in approximately 50mV increments and asserts a reset when VCC voltage falls below the reset threshold.

Features

  • 370nA Quiescent Current, Extends Battery Life.
  • Edge/Level Trigger MR Input.
  • Factory-Set Reset Timeout Period.
  • MR Debounce Circuitry.
  • Factory-Set Threshold: 1.7V to 4.85V.
  • WLP and SOT23 Packages.
  • -40°C to +125°C Temperature Range Ordering Information appears at end of data sheet. Simplified Block Diagram 1.7V to 5.5V VCC MAX16140/MAX16142 MAX16144/MAX16146 MAX16156/MAX16157 MAX16158/MAX16159 MR GND RST VCC µP GND 19-100.

📥 Download Datasheet

Datasheet preview – MAX16159

Datasheet Details

Part number MAX16159
Manufacturer Maxim Integrated
File Size 596.24 KB
Description nanoPower Tiny Supervisor
Datasheet download datasheet MAX16159 Datasheet
Additional preview pages of the MAX16159 datasheet.

📁 Similar Datasheet

  • MAX1615 - Low-Power Linear Regulators (Maxim)
  • MAX161 - CMOS 8-Bit 8Channel Data Acquisition System (Maxim)
  • MAX1610 - Digitally Controlled CCFL Backlight Power Supplies (Maxim)
  • MAX1611 - Digitally Controlled CCFL Backlight Power Supplies (Maxim)
  • MAX1612 - Bridge-Battery Backup Controller (Maxim)
  • MAX16126 - Load-Dump/Reverse-Voltage Protector (Maxim Integrated Products)
  • MAX16127 - Load-Dump/Reverse-Voltage Protector (Maxim Integrated Products)
  • MAX1613 - Bridge-Battery Backup Controller (Maxim)
  • MAX1614 - High-Side / N-Channel MOSFET Switch Driver (Maxim)
  • MAX16165 - 4-Channel Sequencer and Superviso (Analog Devices)
Other Datasheets by Maxim Integrated
  • MAX16150 - nanoPower Pushbutton On/Off Controller
  • MAX16152 - nanoPower Supervisor and Watchdog Timer
  • MAX16153 - nanoPower Supervisor and Watchdog Timer
  • MAX16154 - nanoPower Supervisor and Watchdog Timer
  • MAX16155 - nanoPower Supervisor and Watchdog Timer
  • MAX16156 - nanoPower Tiny Supervisor
  • MAX16157 - nanoPower Tiny Supervisor
  • MAX16158 - nanoPower Tiny Supervisor

Full PDF Text Transcription

Click to expand full text
Click here for production status of specific part numbers. MAX16140/MAX16142/MAX16144/ MAX16146/MAX16156–MAX16159 nanoPower, Tiny Supervisor with Manual Reset Input General Description The MAX16140/MAX16142/MAX16144/MAX16146/ MAX16156/MAX16157/MAX16158/MAX16159 are ultralow-current, single-channel supervisory ICs that monitor the VCC voltage from 1.7V to 4.85V in approximately 50mV increments and asserts a reset when VCC voltage falls below the reset threshold. The reset output remains asserted for the reset timeout period after the VCC vthoeltaSgeelercistoersGaubidoevefotrheavfaaiclatobrley-rseesteVt CtimC_eToHut+oVptHioYnSs..
Published: |